Ford Focus Known Problems: Australian Used Buyer Guide
Table of Contents
- Quick Answer: What Are the Common Ford Focus Problems to Check?
- Reported Faults by Focus Variant at a Glance
- Ford Focus Issues in Australia
- Ford Focus Model-Specific Checks
- LW Focus: What to Verify
- LZ Focus: What to Verify
- SA Focus: What to Verify
- How Reliable Is a Used Ford Focus?
- Transmission Problems by Gearbox Type
- PowerShift Issues and Repair History
- Automatic Gearbox Checks
- Shudder Under Acceleration
- Clutch Concerns and Campaign Checks
- Gearbox Repair and Replacement Quote Factors
- Engine Symptoms and Diagnostic Checks
- Stalling or Reduced Engine Power
- Check Australian Recalls and Service Actions
- Used Ford Focus Inspection Checklist
- Ford Focus Known Problems FAQs
- Are there Ford Focus years to avoid?
- Is a used Ford Focus worth buying?
- What should you check when buying a used Ford Focus?
- Is a used Ford Focus reliable?
- What is the difference between the LW, LZ and SA Focus?
- Does every automatic Ford Focus have PowerShift problems?
- Which Ford Focus models have the PowerShift transmission?
- What causes a Ford Focus transmission shudder?
- How much does a Ford Focus gearbox replacement cost?
- Why would a Ford Focus stall or lose power?
- How do you check a Ford Focus for recalls?
Ford Focus known problems depend on which Focus you are looking at. The Focus sold in Australia has used three different automatic gearboxes across three generations: the LW, which went on sale in August 2011, had a six-speed dual-clutch automatic that Ford calls PowerShift; the LZ, from late 2015, replaced it with a conventional six-speed automatic; and the SA, from late 2018, has an eight-speed automatic. That one fact explains most of the Ford Focus problems in Australia that buyers ask about, and it is also why advice about one Focus often does not apply to another. This guide sets out the Focus problems that the sources we found tie to a generation, engine or gearbox, the official recalls and service actions to check by VIN, how to read symptoms such as shudder or stalling, what a gearbox quote should show, and a checklist for a used Focus. We found no source that publishes failure rates for each generation, so nothing here says how often any fault occurs. The one regulator figure we found is labelled with its date and scope. Reported concerns, recalls and ordinary wear are kept apart, each source is named with its date where it has one, and none of it is a diagnosis of a particular car.
Quick Answer: What Are the Common Ford Focus Problems to Check?
- Identify the generation, engine and gearbox first. Check whether the car is an LW, an LZ or an SA, and whether it has a manual, a dual-clutch automatic or a torque converter automatic. Advice for one does not carry over to the others.
- The best-documented problem is the LW PowerShift automatic. Ford’s own FAQ says certain 2010 to 2016 petrol Focus, Fiesta and EcoSport models with PowerShift transmissions have been diagnosed with technical issues including a shudder under light acceleration, that fixes are now available, and that a government investigation has not identified any safety concerns. The same page says manual and diesel models are not affected.
- Not every automatic Focus is a PowerShift. GoAuto (2 September 2015) reported that the LZ’s automatic versions dropped the Getrag-supplied PowerShift for a Ford-built six-speed torque converter automatic. The SA’s eight-speed automatic is a torque converter unit as well.
- The official record is public. In April 2018 the Federal Court declared, by consent, that Ford engaged in unconscionable conduct in handling PowerShift complaints and ordered a $10 million penalty. A separate class action (Capic v Ford) has produced Federal Court, Full Court and High Court decisions, and a judgment dated 2 February 2026.
- Recalls are separate from PowerShift. We found Focus notices for front drive shafts, a fuel tank and carbon canister fault, a clutch overheating fault, an engine wiring loom fault, an oil separator fault and a rear-view camera software fault. The details are in the recalls section below.
- Symptoms are not diagnoses. Shudder, stalling and warning lights can each have more than one cause, so get a scan and an inspection before accepting a replacement.
- Repair prices. We found no verified current Australian price for a Focus gearbox repair or replacement. The only figure we can cite is a general range from our own gearbox guide.
- Years to avoid. We found no source that justifies a blanket year blacklist. Several reviewers advise avoiding LW cars with the dual-clutch automatic, and that is opinion layered on a real public record, but it is not a verdict on every LW.
- What we did not find: failure rates by generation, current Australian repair prices, service intervals for each gearbox from Ford Australia, and long-term fault patterns for the LZ or SA.
Reported Faults by Focus Variant at a Glance
These are the Ford Focus common faults and concerns that the sources we found tie to a generation, gearbox or symptom. “Common” here means commonly reported or commonly asked about, not common in a measured sense. The numbering is for reference, not ranking.
1. LW petrol with the PowerShift automatic (2011 to 2015)
- Type: official record and reported concern
- What is reported: shudder under light acceleration, clutch and transmission control module concerns, a warranty extension, an ACCC penalty and a class action
- Check: the gearbox type, the repair history and what Ford work was done, and a test drive by someone who knows PowerShift
2. LW with a manual gearbox
- Type: ordinary wear item
- What is reported: Ford’s FAQ says manual models are not affected by the PowerShift program
- Check: clutch bite point, slip and judder on take-off
3. LW diesel
- Type: conflicting sources
- What is reported: CarsGuide says the diesel also had a dual-clutch automatic, while Ford’s FAQ says diesel models are not affected
- Check: the fitted gearbox and what Ford says applies to the VIN
4. LZ 1.5 EcoBoost (late 2015 to 2018)
- Type: reviewer remarks and recalls to check by VIN
- What is reported: carsales cautions about LZ cars with no transmission fluid change every 50,000 km, which can show slow shifting and vibration, and RACV says heater cores have reportedly leaked
- Check: fluid service records, the cooling system, and recall completion
5. LZ ST and RS
- Type: wear and use, not a reported fault
- What is reported: the ST (2.0-litre turbo, manual) and RS (2.3-litre turbo) were the performance models. We found no source reporting a fault pattern for them
- Check: clutch condition, tyre wear, underbody scrapes and signs of hard use
6. SA (late 2018 to 2022)
- Type: reviewer remarks on the gear selector, plus recalls to check by VIN
- What is reported: reviewers found the rotary gear selector slow to respond. Two Ford notices list 2018 to 2019 Focus models for an engine wiring loom fault, without naming the generation
- Check: recall completion by VIN and the selector’s behaviour on a test drive
7. Stalling or reduced engine power
- Type: symptom, not a diagnosis
- What is reported: one recall names wiring loom damage as a cause
- Check: a fault scan and the recall status of the VIN
8. Recalls and service actions
- Type: official campaigns, listed below
- Check: each one by VIN with Ford Australia
Ford Focus Issues in Australia
Ford Focus issues in Australia are specific to the Australian line-up of engines and gearboxes, so check what the car in front of you has. carsales (Cliff Chambers, 24 August 2024) says the local LW choices were 1.6 or 2.0-litre petrol or the 2.0 turbo-diesel. Overseas Focus models were sold with other engines and gearboxes, so a report from another market does not automatically apply to an Australian car. Check the fitted engine and gearbox before applying one.
1. LW (August 2011 to 2015)
- Launch: GoAuto says the LW arrived in Australia in August 2011. CarsGuide (27 June 2018) says a Mark II update followed in 2012, when Australian-delivered production moved from Germany to Thailand
- Engines: 1.6-litre petrol, 92 kW and 159 Nm. 2.0-litre petrol, 125 kW and 202 Nm. 2.0-litre turbo-diesel, 120 kW and 340 Nm (CarsGuide)
- Gearboxes: a five-speed manual on petrol hatches, and a six-speed dual-clutch automatic. CarsGuide says sedans were automatic only and the diesel also got the dual-clutch transmission
2. LZ (late 2015 to 2018)
- Engines: a 1.5-litre EcoBoost turbo petrol with 132 kW and 240 Nm in the Trend, Sport and Titanium. The ST has a 2.0-litre turbo (184 kW) and the RS a 2.3-litre turbo (257 kW), from late 2016 (CarsGuide, RACV and carsales)
- Gearboxes: a six-speed manual or a new six-speed torque converter automatic (GoAuto, 2 September 2015). RACV says the Trend was also offered as a manual, and carsales says the Titanium was automatic only. The ST was a manual. GoAuto reported that the diesels disappeared, and carsales (2 September 2015) said the Ambiente was dropped
3. SA (late 2018 to 2022)
- Engine and gearbox: carsales (24 August 2024) says it was built in Germany, with an eight-speed automatic and an improved 1.5-litre engine. Drive and carsales reviews describe a 1.5-litre three-cylinder turbo with 134 kW and 240 Nm
- Variants: ST-Line (hatch and wagon), Active and Titanium. Reviews disagree about whether a manual was offered, so confirm on the car
- End of the line: carsales (24 August 2024) says local production of this line ended in early 2022 and gives Australian sales of 725 for 2021. We did not verify those figures against Ford
What this does not prove
- Year ranges here are approximate. Check the build date and compliance plate of the car in front of you.
- A generation name does not tell you which gearbox a car has. The LW alone had manual and automatic versions.
Ford Focus Model-Specific Checks
LW Focus: What to Verify
Ford Focus LW problems centre on the dual-clutch automatic, so the first job is to confirm what the car has.
- What the sources say: CarsGuide (27 June 2018) says the LW’s reputation for “appalling reliability” came from the PowerShift transmission, that the reported problems relate to the clutch packs and the transmission computer, and that shuddering when taking off from a standing start is a giveaway though it does not happen every time. It also calls the problem “so widespread as to rule out the LW Focus as a used buy”. That is a reviewer’s view, not a measured finding. It says reliability apart from PowerShift was “commendable”.
- Early view: a Drive used car review (the page address carries 20 May 2014) said it had not heard of a huge number of failures but had heard of a few worrying cases, with the problem seeming to centre on the clutch packs and the mechatronics. That view predates the ACCC’s 2017 proceedings, its 2018 penalty and the 2021 court findings described below.
- Another view: RACV (Royal Auto, 18 April 2020) calls the LW “a used car to avoid” because of the PowerShift problems.
- Check: the gearbox type, the build date, Ford’s repair history, the clutch and input shaft seal work, and a test drive that includes take-off from a stop. CarsGuide suggests regular servicing and a test by a mechanic experienced with PowerShift.
- What this does not prove: an LW with a manual gearbox is not in Ford’s PowerShift program, and an LW automatic that drives smoothly today may still have a repair history worth reading. A reviewer’s blanket advice is not a statement about the car in front of you.
LZ Focus: What to Verify
Ford Focus LZ problems should not be judged from LW claims, because the LZ’s automatic is a different kind of gearbox.
- What the sources say: GoAuto (2 September 2015) says all LZ automatics dropped the Getrag-supplied PowerShift for a Ford-built six-speed torque converter automatic. carsales (24 August 2024) says the LZ’s automatic replaced the PowerShift, and it advises caution with cars that have not had the transmission fluid changed every 50,000 km, as slow shifting and vibration can result. RACV (18 April 2020) says to confirm that gear changes are smooth and there is no slipping.
- Other reviewer remarks: RACV says heater cores have reportedly leaked, that new brake pads may mean new rotors are needed as well, and that regular oil changes matter with a modern turbo engine. carsales says cabin plastics can fade and crack, front knocking may be a worn steering rack or leaking struts, and rough idle and stuttering under acceleration are listed as common faults without further detail.
- Recall to check: RACV says Ford recalled 2015 and 2016 models for excessive clutch slip, which could break the pressure plate. The official notice is described in the clutch section below, and it does not say which Focus variants it covers.
- Check: fluid service records, the cooling system, the clutch if it is a manual, and recall completion by VIN.
- What this does not prove: we found no Australian source reporting a measured fault pattern for the LZ automatic. Reviewer remarks are not failure rates.
SA Focus: What to Verify
Ford Focus SA problems depend on the build date, so confirm it and check campaign applicability by VIN.
- What the sources say: the SA has an eight-speed automatic. A carsales review of the 2019 ST-Line wagon called it a big improvement over the “controversial (and ultimately flawed)” PowerShift. carsales reviewers of 2019 and 2020 cars found the rotary dial selector slow to respond, with one carsales reviewer saying selecting reverse took roughly two seconds and the car rolled forward on a slope a few times. Those are comments on new cars, not fault reports.
- Recalls to check: Ford notices list 2018 to 2019 Focus models for an engine wiring loom fault (REC-000318 and REC-000325), 2019 to 2022 Fiesta and Focus models for an oil separator fault, and 2018 to 2023 Focus among other models for a SYNC software fault. The notices do not name the generation, so check each by VIN. The details are below.
- Engine: the SA’s 1.5-litre has three cylinders, while the LZ’s has four. Do not carry over engine reports between them without checking.
- Check: recall completion, the selector’s behaviour when changing between Drive and Reverse, and the warning lights.
- What this does not prove: we found no Australian source reporting a measured fault pattern for the SA, and its reviews were written on new cars.
How Reliable Is a Used Ford Focus?
Used Ford Focus reliability cannot be reduced to one score, and we found no failure rate or reliability score for each generation that we could verify. This guide does not give one. What exists is reviewer opinion, reader answers, regulator findings and official recalls.
- CarsGuide (Graham Smith, 27 June 2018): says that apart from the PowerShift issues the Focus’s reliability is “commendable”. It also carries owner comments, most of them negative. Those are individual accounts, not a measure.
- carsales (Cliff Chambers, 24 August 2024): says the LZ’s automatic replaced the troubled PowerShift, notes the fluid change caution above, and lists rough idle and stuttering under acceleration as common faults without giving data.
- RACV (18 April 2020): calls the LW a used car to avoid, says to check that LZ gear changes are smooth, and notes that heater cores have reportedly leaked and that oil changes matter.
- ACCC (26 April 2018): says that of the more than 70,000 Fiesta, Focus and EcoSport vehicles fitted with the PowerShift transmission and supplied from 2011 to 2016, 37 per cent had at least one clutch replacement. That is a regulator’s figure for all three models at that date, not a Focus-only number and not a prediction for a given car.
- Where this leaves a buyer: the evidence supports identifying the gearbox, checking the repair history and recalls, and judging the individual car, rather than treating every Focus the same way.
What this does not prove
- A reviewer’s opinion is not a failure rate.
- A good report on one car says little about the next one.
- The ACCC figure covers a specific group of vehicles to 2018 and says nothing about LZ or SA cars.
Transmission Problems by Gearbox Type
Ford Focus transmission problems are not one problem, because the Australian Focus has had a manual, a dual-clutch automatic and two kinds of conventional automatic. Identify the gearbox before discussing faults, and do not attribute PowerShift concerns to every automatic Focus.
1. LW petrol with the PowerShift automatic
- Gearbox: a six-speed dry dual-clutch automatic (ACCC, 26 April 2018, and the High Court’s 2024 reasons)
- Reported concerns: the shudder, clutch and transmission control module concerns described below
- Check: the repair history, Ford’s records and a test drive that includes take-off from a stop
2. LW with a manual gearbox
- Gearbox: a five-speed manual on petrol hatches (CarsGuide)
- Reported concerns: Ford’s FAQ says manual models are not affected by the PowerShift program, and CarsGuide answered a reader on 23 February 2018 that buying a manual avoids the PowerShift question
- Check: clutch wear, because a clutch is a wearing part (RACV)
3. LW diesel
- Gearbox: CarsGuide says the diesel also got a dual-clutch automatic, and a CarsGuide answer (23 February 2018) says PowerShift was used on petrol and diesel engines
- Reported concerns: Ford’s FAQ says diesel models are not affected by its PowerShift program. The sources disagree, so ask Ford what applies to the VIN
4. LZ with the six-speed automatic
- Gearbox: a Ford-built six-speed torque converter automatic that replaced the PowerShift (GoAuto, 2 September 2015)
- Reported concerns: carsales cautions about cars with no transmission fluid change every 50,000 km. RACV says to confirm that gear changes are smooth with no slipping
- Check: fluid service records and the way it shifts cold and hot
5. SA with the eight-speed automatic
- Gearbox: an eight-speed torque converter automatic with a rotary dial selector
- Reported concerns: reviewers found the selector slow to respond on new cars
- Check: the selector, Drive and Reverse engagement, and recall status
What this does not prove
- A label such as “dual-clutch” or “automatic” does not tell you which unit a car has. Confirm it from the car and Ford’s records.
- Sources about the LW say nothing about the LZ or SA, and the reverse is also true.
PowerShift Issues and Repair History
Ford Focus PowerShift problems have a public record, which is unusual for a used car. Here is what each source says and when.
- What PowerShift is: the ACCC describes it as a six-speed dry dual-clutch automatic. The High Court’s 2024 reasons say 73,451 Focus, Fiesta and EcoSport vehicles fitted with the DPS6 PowerShift were imported.
- Ford’s FAQ (page read November 2026): says certain 2010 to 2016 petrol Focus, Fiesta and EcoSport models with PowerShift transmissions have been diagnosed with technical issues including a shudder under light acceleration, that fixes are now available, and that a government investigation has not identified any safety concerns. It asks owners with problems to call 13FORD or their dealer. A separate answer on the same page gives the affected Focus years as 2011 to 2015 and says manual and diesel models are not affected.
- Ford’s warranty extension (CarAdvice, undated in the copy we read): Ford extended cover for repairs on the clutch and input shaft seals, and the transmission software calibration, to five years or 160,000 km from the warranty start date. The article lists the Focus as 2012 to 2013 and says Ford called it a customer satisfaction program, not a recall. It says the cover transfers to subsequent owners. GoAuto (3 September 2015) said Ford extended the warranty to five years or 160,000 km on all PowerShift models in 2014. Those limits have passed for most cars, so do not assume any cover remains. Ask Ford what applies to the VIN.
- Ford’s explanation (CarAdvice, undated): Ford attributes the shudder to fluid contamination of the clutch from leaking input shaft seals and to heat build-up in the clutch friction material. It says it released a new formulation for the friction material, and dealers may fit the latest-specification clutch, replace input shaft seals, or replace or recalibrate the transmission control module, depending on assessment.
- ACCC (27 July 2017 and 26 April 2018): the ACCC began proceedings in July 2017. On 26 April 2018 the Federal Court declared, by consent, that Ford engaged in unconscionable conduct in how it handled complaints about PowerShift cars between 1 May 2015 and 29 February 2016, and ordered a $10 million penalty. The ACCC release says Ford knew its vehicles had three separate quality issues, that complaints included excessive clutch shudder, noise from the transmission and delayed acceleration, and that 37 per cent of the vehicles had at least one clutch replacement.
- Class action (Capic v Ford, case NSD724/2016): the High Court’s 2024 summary says Ms Capic, who bought a 2012 Focus, brought proceedings for people who bought vehicles with the DPS6 PowerShift between 1 January 2011 and 29 November 2018. Later summaries mention an extended class period, so check the current notice. The primary judge found all the vehicles were supplied in breach of the acceptable quality guarantee (judgment of 29 June 2021). The Full Court dismissed Ford’s appeal on the key points (14 November 2023). The High Court allowed an appeal on how damages are assessed and sent that question back (6 November 2024). A Federal Court judgment dated 2 February 2026 deals with later issues, including class members selling their vehicles. Ford’s website hosts the court’s class action notices.
- Reviewers: CarsGuide (27 June 2018) says the reported problems relate to the clutch packs and the transmission computer. A CarsGuide answer (15 January 2016) on a 2012 Focus said it has a dry clutch transmission with no call for an oil change, which is one reader answer, not a service schedule.
What this does not prove
- The ACCC and court findings concern the group of vehicles and Ford’s conduct. They do not tell you the condition of a particular car.
- A claim in a class action is a legal matter. Whether a car you are buying carries any rights is a question for a lawyer, and this guide does not answer it.
- Ford’s 2014 cover has expired for most cars, so a repair history matters more than the program.
What to check
- Gearbox identification: confirm it is a PowerShift and not a manual, a diesel or a later automatic
- Repair history: which clutch, seal and software work was done, by whom, and when
- Ford records: ask Ford Australia what work it has on record for the VIN
- Test drive: cold and hot, with attention to light acceleration and take-off from a stop
- Independent inspection: by a mechanic who works on PowerShift gearboxes, as CarsGuide advises
Automatic Gearbox Checks
Ford Focus automatic gearbox problems depend on the unit, so identify the gearbox before you test it.
- Identify the unit: the generation, the engine and the gearbox type. A dual-clutch car and a torque converter car behave differently.
- Cold start: the first engagement into Drive and Reverse, and the first few minutes of driving
- Hot test: repeat after a longer drive, because some symptoms only appear warm
- Take-off and light throttle: judder, shudder, hesitation or a harsh start. These are the symptoms Ford, the ACCC and reviewers describe for the PowerShift
- Gear changes: for LZ and SA cars, smooth changes with no slipping, as RACV advises
- Selector: on an SA, how long it takes to engage Drive and Reverse, because reviewers found the dial slow
- Warnings: any transmission warning, reduced power or limp behaviour, and the stored codes
- Fluid history (LZ): carsales cautions about LZ cars that have not had the transmission fluid changed every 50,000 km, so ask for the invoices
Shudder Under Acceleration
Ford Focus transmission shudder is a symptom, not a diagnosis. The sources give more than one cause.
- Ford (via CarAdvice, undated): attributes shudder under light acceleration in PowerShift cars to fluid contamination of the clutch from leaking input shaft seals and to heat build-up in the friction material.
- CarsGuide (27 June 2018): says shuddering when taking off from a standing start is a giveaway on an LW but does not happen every time, and that reported problems relate to the clutch packs and the transmission computer.
- Drive (used car review, May 2014): said the problem seemed to centre on the clutch packs, and the review also pointed to the mechatronics.
- A separate recall: Ford’s front drive shaft notice (REC-000298) says shafts that do not meet specification could fail during initial acceleration and take-off, and advises owners to avoid aggressive acceleration until the work is done. That is a different fault from a clutch shudder, but a drive shaft concern can also show up on take-off.
What this does not prove
- Shudder alone does not tell you whether a clutch, a seal, software or a drive shaft is at fault. A scan and an inspection are needed.
- A car that does not shudder on a short test drive may still have a repair history worth reading.
Clutch Concerns and Campaign Checks
Ford Focus clutch problems should not be confused with PowerShift complaints, because the clutch recall is a separate notice.
- REC-000310 (PRA 2018/16755, campaign 18S07): the notice lists the model as FOCUS/KUGA, 2012 to 2016, with 2,836 vehicles identified by VIN list. It says the clutch assembly may overheat as a result of excessive clutch slip, which could crack or fracture the clutch pressure plate, damage the transmission assembly and allow transmission fluid to leak. It warns that leaking fluid near an ignition source can lead to an engine compartment fire. The notice tells owners to contact an authorised Ford dealer, and Ford writes to owners.
- What the notice does not say: it does not say which Focus variants are included, which transmission they have, or whether it covers Focus, Kuga or both. RACV (18 April 2020) says Ford recalled 2015 and 2016 models for excessive clutch slip, so check the VIN rather than assuming.
- Manual cars: RACV says to check for clutch slip in manuals, since the clutch is a wearing part. CarsGuide notes that a manual avoids the PowerShift question.
- Check: the VIN with Ford, the clutch’s service history, and slip or judder on take-off.
What this does not prove
- A recall for a clutch assembly is not evidence that every Focus clutch will fail.
- Do not link this notice to PowerShift complaints unless Ford confirms it for the VIN.
Gearbox Repair and Replacement Quote Factors
We found no verified current Australian price for a Focus gearbox repair or replacement, and this guide does not invent one. What we can cite is a general range from our own guide:
- Our gearbox replacement cost guide (10 September 2026): says replacement costs “can range from around $2,000 to $10,000 or more”. That is a general guide. It is not a Focus figure and it is not broken down by Focus gearbox.
- Used, reconditioned and new units: the same guide discusses these options. Check the donor vehicle, kilometres, gearbox code, warranty and compatibility of any unit you are quoted.
What a gearbox quote should separate
- Parts and labour: each listed separately, so you can see what the repair involves
- Diagnosis: the scan, road test and any inspection, and what happens to that cost if you proceed
- Evidence: the stored codes and what showed the fault is in the gearbox, not the driveline
- Scope: a clutch, input shaft seals, software or the transmission control module, a rebuild or a complete unit, and why
- Unit type: new, reconditioned or used, and for a used unit the donor vehicle, kilometres and gearbox code
- Programming: calibration or adaptation after the work, and a road test
- GST and warranty: whether prices include GST, the warranty period and distance, and what the warranty covers
The Western Australian Consumer Protection page (updated 4 December 2023) advises asking for a written quote or estimate detailing the work and cost, says an accepted quote forms a contract binding both sides, and says you should not automatically authorise additional repairs. It also says the Australian Consumer Law requires repairs to be done with due care and skill, including when second-hand parts are used. That page covers Western Australia, so check your own state’s consumer affairs body.
Engine Symptoms and Diagnostic Checks
Ford Focus engine problems depend on the engine, so confirm it before applying any report, including reports from other markets. The LW had a 1.6 or 2.0-litre petrol or a 2.0 turbo-diesel, the LZ a four-cylinder 1.5-litre turbo (with a 2.0 turbo ST and a 2.3 turbo RS), and the SA a three-cylinder 1.5-litre turbo.
- What the sources say: carsales (24 August 2024) lists rough idle and stuttering under acceleration as common faults on the LZ and SA range, without data or detail. RACV (18 April 2020) says heater cores have reportedly leaked on the LZ, so check the cooling system, and that regular oil changes matter with a modern turbo engine.
- Engine recalls: a fuel tank and carbon canister notice (REC-000301), an engine wiring loom notice (REC-000318 and REC-000325) and an oil separator notice (REC-005431). The details are in the recalls section below.
- Fitment: this guide does not apply reports from other markets to Australian cars without a fitment check.
- Check: the engine code and service history, oil condition and level, leaks, cooling system, warning lights and stored codes.
What this does not prove
- A reviewer’s list of faults is not a measure of how often they happen.
- A recall for one component is not evidence that the engine as a whole is unreliable.
Stalling or Reduced Engine Power
Ford Focus engine stalling has many possible causes, and the sources we read give no Focus-specific list beyond one recall.
- The recall: the 2018 to 2019 wiring loom notices (REC-000318 with 2,787 vehicles and REC-000325 with 342) say the transmission stud may chafe on the engine wiring loom and the engine warning light may illuminate. The hazard is reduced engine power and engine stall. The notices say Ford contacts owners and the inspection and repair are free.
- Other causes: the notices cover specific vehicles. Other causes require diagnosis, so do not assume a stall is the recalled fault.
- What to ask: whether the stall happens hot or cold, at what speed, what warnings appear, what was recently repaired, and what the stored fault codes say.
- Check: the VIN with Ford, and a scan by someone qualified.
Check Australian Recalls and Service Actions
The recalls below are the Focus-relevant campaigns we found. They are examples, not an exhaustive list, and affected vehicles depend on VIN. A recall record shows the campaign existed, not whether a particular vehicle was repaired. Ford’s own support pages say recall programs are VIN specific. CarAdvice reported that Ford’s PowerShift warranty extension was a customer satisfaction program, not a recall.
1. Front drive shafts (REC-000298, PRA 2015/14925, campaign 15S24)
- What it is: 4,277 Focus vehicles. The notice says the front drive shafts may not meet specification and could fail during initial acceleration and take-off. It warns of a loss of ability to accelerate from a standing start and advises avoiding aggressive acceleration until repaired.
- Limits: the page we read does not show a year range, and says vehicles previously repaired under Program R1413 are not subject to the recall.
2. Fuel tank and carbon canister (REC-000301, PRA 2017/16259, campaign 16S38)
- What it is: 42,948 Focus vehicles from 2011 to 2015. The notice says certain vehicles under particular environmental conditions may ingest excessive dust, which may block the carbon canister during a purge cycle and push the fuel tank beyond its design vacuum. The hazard is a cracked fuel tank and a fuel leak.
3. Clutch overheating (REC-000310, PRA 2018/16755, campaign 18S07)
- What it is: 2,836 FOCUS/KUGA vehicles from 2012 to 2016, covered in the clutch section above.
4. Engine wiring loom (REC-000318, PRA 2020/18538, campaign 19S50, and REC-000325, PRA 2021/18939, campaign 20S74)
- What it is: 2,787 and 342 Focus vehicles respectively, both listed as 2018 to 2019. Both notices carry the same defect text about the transmission stud chafing the engine wiring loom. The notices do not give the engine or the generation.
5. Engine oil separator (REC-005431, campaign 22S21)
- What it is: 938 Fiesta and Focus vehicles from 2019 to 2022. The notice says the right-hand engine oil separator may have been damaged before engine assembly, which could cause an oil leak and, near an ignition source, a fire. Occupants might notice an oil smoke smell or smoke from under the bonnet. The notice does not name the engine.
6. SYNC software (REC-006401, campaign 25S72)
- What it is: 167 vehicles across several Ford models, including the Focus, from 2018 to 2023. The notice says an error in the SYNC software may mean the rear-view camera does not display the image while reversing.
What to do
- Ask Ford: use Ford Australia’s recall and service action look-up with the 17-digit VIN, or call the Ford Customer Relationship Centre on 1800 503 672 or 13 FORD (13 3673), or ask a Ford dealer.
- Check the register: vehiclerecalls.gov.au lists the notices above, and the ACCC lists recalls by brand.
- Keep the proof: Ford says recall repairs must be done by or with an authorised Ford dealer and carry a 12-month, 20,000 km parts and labour warranty, or the remainder of the new vehicle warranty if that is longer.
Used Ford Focus Inspection Checklist
What to check when buying a used Ford Focus depends on the generation and gearbox, so tailor the list. The points below combine the sources above with service history and prior repairs.
- Identify the car: the build date, generation (LW, LZ or SA), engine, and whether it has a manual, a dual-clutch automatic or a torque converter automatic
- Recalls and service actions: a VIN check with Ford Australia for each campaign above, and written proof of completed work
- Service records: invoices for each service, including any gearbox fluid service on an LZ and any clutch, seal or software work on an LW
- Prior repairs: what was replaced, why, and who did it
- Cold start test: the first engagement into Drive and Reverse, and the first few minutes of driving
- Hot test: repeat after a longer drive
- Take-off and light throttle: shudder, judder, surging, hesitation or slipping
- Selector: on an SA, engagement of Drive and Reverse
- Warnings: any engine, transmission or other warning, and whether the car has stalled or lost power
- Scan: a fault scan with stored codes, done by someone qualified
- Cooling system and leaks: a heater core check on an LZ, and any oil or fluid leaks
- Interior and trim: cabin plastics that fade or crack, as carsales notes, and whether the rear-view camera works
- Hard use: underbody scrapes, uneven tyre wear and signs of hard use, especially on the ST and RS
- Independent inspection: an independent pre-purchase inspection, with a mechanic who works on PowerShift for an LW automatic. It can check the items above, but it cannot predict a future fault
Ford Focus Known Problems FAQs
Are there Ford Focus years to avoid?
We do not publish a blanket blacklist, because the evidence points to gearboxes and repair history rather than years alone. CarsGuide and RACV advise avoiding LW cars with the PowerShift automatic, and the ACCC and the courts have a public record about that gearbox, but Ford’s FAQ says manual and diesel models are not in its PowerShift program. LZ and SA cars have different automatics. Judge the car by its gearbox, repair history, recalls and a test drive.
Is a used Ford Focus worth buying?
It can be, but nothing we found supports a blanket answer. Weigh the asking price against the car’s gearbox type, condition, service and repair records, completed recalls and any repair an inspection confirms. We found no verified current Australian repair prices, so an itemised quote for any confirmed repair is the best way to size the risk.
What should you check when buying a used Ford Focus?
Confirm the generation, engine and gearbox, then check every recall by VIN and read the service and repair invoices. Test the car cold and hot, including take-off from a stop, ask for a fault scan, look for leaks, and get an independent inspection. For an LW automatic, use a mechanic who works on PowerShift.
Is a used Ford Focus reliable?
We found no verified failure rates or reliability scores by generation. CarsGuide (27 June 2018) calls the Focus’s reliability commendable apart from the PowerShift, and the ACCC (26 April 2018) reported that 37 per cent of PowerShift Fiesta, Focus and EcoSport vehicles had at least one clutch replacement. Judge the specific car by its gearbox, repair history and recall work.
What is the difference between the LW, LZ and SA Focus?
The LW went on sale in Australia in August 2011 with a manual or a six-speed dual-clutch automatic. The LZ followed in late 2015 with a 1.5-litre turbo and a six-speed torque converter automatic in place of the PowerShift. The SA arrived in late 2018 with a three-cylinder 1.5-litre turbo and an eight-speed automatic. Confirm by build date and compliance plate.
Does every automatic Ford Focus have PowerShift problems?
No. GoAuto (2 September 2015) reported that the LZ’s automatics replaced the PowerShift with a Ford-built six-speed torque converter automatic, and the SA has an eight-speed automatic. The concerns described by Ford, the ACCC and the courts relate to the LW-era dual-clutch gearbox. Check the fitted gearbox rather than assuming from the word automatic.
Which Ford Focus models have the PowerShift transmission?
Ford’s FAQ says certain 2010 to 2016 petrol Focus, Fiesta and EcoSport models have it, and gives the affected Focus years as 2011 to 2015. The class action notices list LW Focus models from 2011 to 2015. CarsGuide says the LW diesel also had a dual-clutch automatic, while Ford’s FAQ says diesel models are not affected, so ask Ford what applies to the VIN.
What causes a Ford Focus transmission shudder?
The sources give more than one cause. Ford attributes PowerShift shudder to fluid contamination from leaking input shaft seals and to heat build-up in the clutch friction material, CarsGuide points to the clutch packs and the transmission computer, and a separate recall covers front drive shafts that could fail on take-off. Shudder needs diagnosis, and a replacement should not be accepted on the symptom alone.
How much does a Ford Focus gearbox replacement cost?
We found no verified current Australian price. Our gearbox guide (10 September 2026) gives a general range of about $2,000 to $10,000 or more across vehicles, which is not a Focus figure. Get an itemised written quote that separates parts, labour, diagnosis, programming, GST and warranty.
Why would a Ford Focus stall or lose power?
There are many possible causes. One recall (REC-000318 and REC-000325, 2018 to 2019 Focus) says a transmission stud may chafe on the engine wiring loom and cause reduced engine power and stalling, but other causes need diagnosis. Check the VIN with Ford and get the stored codes read.
How do you check a Ford Focus for recalls?
Enter the 17-digit VIN in Ford Australia’s recall and service action look-up, ask a Ford dealer, or call 1800 503 672 or 13 FORD. The campaigns we found include the drive shaft, fuel tank, clutch, engine wiring loom, oil separator and SYNC notices. They are examples, not a full list.
Looking for this part?
Send one enquiry and reach Australian suppliers who handle your vehicle.
Request a quote